CP-ITV-D300 and CP-ITV3-VC

Description

The Telemetrics CP-ITV-D300 is an RS-232 serial desktop control panel designed to control the Sony EVID30, EVI-D70, EVI-D100, BRC-300, BRCH-700, SNC-RZ30N and Elmo PTC-100 pan/tilt video cameras. Up to four camera systems can be connected and controlled by one control panel.

The Telemetrics CP-ITV3-VC is an RS-232 serial desktop control panel designed to control the Canon VC-C4 and VC-C50 pan/tilt video cameras. Up to four camera systems can be connected and controlled by one control panel.

A proportional rate joystick provides smooth, simultaneous control of pan, tilt and zoom. Switches are provided to control focus and iris of the camera lens, and motorized elevating tripod - Telepod. Six memorized presets, pan, tilt, zoom and focus positions, for each of the four cameras can be recalled by selector switches provided or by external contact closures (option). Interacting local and remote control panels, RS-232 interconnected, can control the cameras at either location by selecting the front panel Local/Remote switch. RS-232 addressable external video switchers are also controllable when operating camera select buttons.

The pan/tilt video cameras may be connected using daisy chain wiring or home run wiring. Various interconnecting cable accessories are available (not included).

Other accessories include a ceiling mounting bracket (CAM-CMBKT) and a wall mounting bracket (CAMWMBKT) and a dome enclosure (CAM-CMDM)

Functions:

• Lens Focus Far/Near
• Lens Focus Auto/Man
• Video Switcher (Daisy Chain Only)
• Telepod Up/Down
• Lens Iris Bright/Dark
• Four Pan/Tilt Camera Select Switches
• Six Preset Shot Switches
• Local/Remote Select (Daisy Chain only)
• Proportional Joystick for control of pan, tilt and zoom.
• (Kramer 6 x 1 Switcher - CVG-SW61C

Specifications and features subject to change without notice.

** CP-ITV D100 Panels manufactured prior to 10/1/2003 will need an upgrade to work smoothly with the EVI-D70 Camera. Consult factory.

***VC-C50i Requires an interface cable adapter. Please advise factory when ordering.

**** The SNC-RZ30N will only operate in home run mode, serial control from each pan/tilt must come back to the CP-ITV-D100. The connector on the SNC-RZ30N is a terminal block, so the Telemetrics standard cables will need to be modified. The serial port must be set to work with the VISCA protocol. This is done by connecting the SNC-RZ30N to a PC and using the web browser.

Consult factory for latest camera and video switcher compatibilty.

Optional Accessories Include: Camera Mounting Brackets, Weatherproof and Indoor Domes, Daisy Chain or Homerun cables.