PS-RM Rack Mount Power Supply

The PS-RM is a rack mounted power supply designed to provide power for a Telemetrics robotics system. Various configurations are available to power up to four Pan/Tilt Heads or combinations of Pan/Tilt Heads, Televators, Camera Tracks and Camera/Lenses.  These power supplies are typically mounted near the camera control panel location and eliminate the need for local AC power outlets and power supplies for the individual camera locations.

PS-CM-3 Chassis Mount Power Supply

The PS-CM-3 Chassis Mount Power Supply is a portable triple power supply design in a rugged housing. A typical application is for powering a Camera, Pan/Tilt Head and Televator Elevating Pedestal where local AC Power is available. Eliminates the need for separate camera manufactures power supply and cables. Power for Camera and Televator is provided through the Pan/Tilt Head power connector.

PS-PACK-PT Pan/Tilt & PSO-PACK-CAM Camera Power Option

PS-PACK-PT and PSO-PACK-CAM provide a flexible and low cost alternative for powering Telemetrics robotics equipment along with various Cameras and Lenses. Typical applications include powering PT-CP-S2 Pan/Tilt head and Camera/Lens in basic camera robotics system configurations. Requires local AC Power at each camera location.

Hybrid Cable Interface System Power Supply - PS-RM-HV1 PSO-RM-HV1-HIO CLIU-HC-PS

The Telemetrics Hybrid Cable Interface System Power Supply is intended to interconnect Sony HDC-X310 Compact HD Camera to its associated HFU-X310 Base Station via SMPTE 311 M hybrid cable. In addition to providing connectivity via two single-mode fiber optic channels, the system also provides camera, pan/tilt and auxiliary power at distances up to 3280 feet(1000 meters). This allows HDCX310 users to utilize existing SMPTE 311 M cable for camera and robotics control.
The system consists of Rack Mount High Voltage Power Supply and Hybrid Cable Power Supply Interface Unit. The rack mount power supply is AC powered and provides high DC voltage via rear mounted 8-pin military connector. Two LED’s on the front indicate the status of the power supply and the power cable. The interface to the SMPTE 311 M cable is via external hybrid patch panel.
Rack mount power supply option with built in hybrid interface is available for users who do not want to use external hybrid patch panels.It connects to HFU-X310 via two industry standard ST fiber optic connectors. The hybrid interface is via Lemo SMPTE 304 M plug connector.
The interface unit can be mounted on a tripod or on the yoke of the Telemetrics pan/tilt head. It connects to HDC-X310 via two ST fiber optic connectors and to the hybrid cable via Lemo SMPTE 304 M receptacle. A DC/DC converter converts the high voltage power to appropriate voltage levels. The power is provided via XLR-6 female connector. All connectors are located in the rear, which greatly simplifies cable management.