 |
 |
|
Pan and Tilt Heads
These Pan/Tilt Head units are of the highest quality all metal construction with heavy duty drive blocks, cross roller bearings, worm gears and precision motors to provide a smooth range of movement. Each unit has a lens connector and built-in lens interface board. They can operate in either 32 bit velocity or full positional servo mode providing a wide choice in control systems. In addition, they can be powered and controlled through Telemetrics Triax/Coax camera control systems.
 |
BROADCAST CAMERA ROBOTICS
Pan & Tilt Heads
Robotics Control Panels
Control System Software
Weatherproof Cam. Sys.
Camera Track Systems
Televator Elev. Pedestal
Telepod Elev. Tripod
Elevating Wall Mount
Extendable Camera Mount
Camera/Lens Interface Unit
Device Server/Control Switch
Power Supplies
Cam/ROP Control Modems
PTZF CAMERA CONTROL PANELS
CP-ITV Cam Cntrl Panels
NU-700 PTZ Cam Cntr Panel
TRIAX/COAX CAMERA ADAPTERS CoaxLink CCU
Triax CCU
Camera Interface Adapters
|
Common Features:
- Smooth ultra slow or high speed "Camera Operator" like moves
- Programmable timed presets start and stop all axes simultaneously with +,- .5 Arc Min Preset Accuracy.
- Aux Controls interface for optional control functions including Camera Track System, Elevating Pedestal, Elevating Wall Mount, Remote Power On/Off.
- Control Panel Programmable and mechanical field adjustable Pan/Tilt end stops.
- Motors isolation mounted and insulated for quiet operation.
- Threaded base for easy tripod mounting,
- Serial camera control and power interface for most Sony, Panasonic, Ikegami, JVC and Hitachi cameras.
|
|
|
|
|
PT-CP-S2: Servo CP Pan/Tilt Head
- Designed to accommodate today's compact single and three-chip "Broadcast quality" cameras and lenses
- Side or top camera mounting platform options.
- Top mounting platform for optimal camera Pan motion
(camera pivots on centerline rather than swinging off center).
- Side mounting platform option for lowest profile and 360 degree tilt.
Options:
- Top Mounting Platform - PTO-CP-S2-T
- Side Mounting Platform - PTO-CP-S2-S
- White Color - PTO-CP-S2-WHT
|
 |
|
 |
PT-HP-S2 Servo Pan/Tilt Head
- Industry's first wrap-around cradle for high performance 3CCD cameras and lenses.
- Adjustable cradle Camera rotates directly on center line
- Supports ENG style cameras/camcorders and larger box type cameras.
- Inverted and ceiling mounted.
- Extended Arms and Yoke options for optimal tilt range and camera orientation.
- Virtual Set option with high resolution positional encoders for Pan/Tilt.
- High resolution positional encoder accessory for Lens Zoom/Focus Virtual Set interface.
- Third Axis Rotator accessory for overhead document viewing.
Options:
- Extended Arms option- PTO-HP-S2-EA
- Extended Yoke option - PTO-HP-S2-EY
- Virtual Set option - PTO-HP-S2-VS
|
|
|
LP Servo Pan/Tilt Head PT-LP-S4
- Smooth slow or high speed “Camera Operator” like moves.
- Programmable timed presets.
- Serial camera control interface for most Sony, Panasonic,
Ikegami, JVC and Hitachi cameras.
- Camera power option.
- Aux Controls interface for optionally available Trolley, Elevating
Pedestal, Elevating Wall Mount.
- Optional teleprompter mounting (consult factory).
- Teleprompter power option.
- Cable management system.
- Serial control through RS-232, RS-422, 10/100 Base-T Ethernet.
- More power delivered at longer distances (see PS-RM-48V
Datasheet for details).
- Teleprompter power always available.
- Enough teleprompter power to operate large screen, high-brightness
teleprompters (80 W).
- Video and power for confidence monitor (optional).
Options
- RS-422 Option - PTO-LP-S4-422
- Camera Control (consult factory) - PTO-LP-S4-CAM
- Camera Power - PTO-LP-S4-PWR
- AMSR11 Lens Control - PTO-LPS4AMSR11
- Virtual Studio Interface - PTO-LP-S4-VS
- High Speed & Heavy Payload - PTO-LP-S4-HS
- Confidence Monitor - PTO-LP-S4-CM
|
|
|
 |
|
|
|
|
